Home»Product introduction»連續性碳纖維3D打印機Fiber

Industrial-grade composites, featuring continuous fiber tapes for unrivaled part strength*. Fiber™ LT is available via an all-inclusive, hardware-as-a-service subscription billed annually at introductory pricing of $3,495 per year.



Fiber™ is the only composite 3D printer capable of Micro Automated Fiber Placement (μAFP™) —unlocking exceptional part strength for a desktop printer. One dedicated to μAFP continuous fiber tape, which builds a high-strength reinforcement along critical load paths. The other two extrude thermoplasticfilaments - the first is used for PA6 nylon, while the second is dedicated to PEEK and PEKK.


Fiber 特點

·Strong parts

Fiber™ combines the exceptional performance of continuous fiber with the ease of FFF printing to produce high-performance parts that are stronger than steel, lighter than aluminum, and can operate continuously in the toughest environments up to 250 ºC.

·Continuous fiber reinforcement

Continuous fiber tape is applied along critical load paths in a process called Micro Automated Fiber Placement (µAFP). Layers of highly loaded continuous fiber tape are laminated to build fully-dense, reinforced sections two times stronger than steel at <1/5 the weight (up to 2,500 MPa tensile strength and <1.5 g/cc).

·Low porosity

Utilizing tapes made with 12k continuous fiber tows, up to 60% fiber volume fraction, and exceptional resin impregnation, Fiber™ is able to achieve continuous fiber reinforcement with less than 1% porosity.

·Multi-directional reinforcement

Layers of continuous fiber are deposited via µAFP. Users can automatically optimize fiber orientation for maximum coverage, or enable Expert Mode to tailor orientation for specific loading conditions.

·Widest range of materials

Fiber™ prints with two printheads—one dedicated to continuous fiber tape; one dedicated to chopped fiber-reinforced filament. Designed for versatility, the printer supports a wide range of fiber-reinforced composites to enable a broad set of applications from consumer electronics to automotive.

·Accessible to all

With a wide range of materials, easy-to-use platform, and affordable subscription tiers, Fiber™ offers high-quality composite printing at a price point every engineer and designer can access.

·Easy to use

In a matter of minutes, users can begin printing industrial-grade composites from the comfort of their desktop. Entry-level settings and opt-in advanced controls allow every engineer to produce high-quality composite parts at the press of a button.


Fiber Applications

Fiber™ applications span a variety of industries including manufacturing, tooling, automotive, consumer, electronics, and marine.

CNC fixture A | PEEK + CF High temp gear | PEKK + CF Camera mount A | PA6 + CF

Mirror mount | PA6 + FG
Bike pedal crank | PA6 + FG
Inspection plate | PA6 + FG

CNC fixture B | PEKK + CF Camera mount B | PA6 + FG
High temp nozzle | PEKK + CF



Print Technology
Micro Automated Fiber Placement (μAFP™)
Fused filament fabrication (FFF)
Build Envelope
FFF: 305 x 245 x 270 mm (12.0 x 9.6 x 10.6 in)
μAFP™: 230 x 230 x 270 mm (9.0 x 9.0 x 10.6 in)
Layer height 130 μm - 250 μm
Nozzle diameter 0.4 mm
Compatible materials

Nylon(PA6) + Carbon Fiber
Nylon(PA6) + Fiberglass
PEEK + Carbon Fiber
PEKK + Carbon Fiber

Automated/Manual optimization
Standard configuration
1 FFF head
1 μAFP head